标签 windows 11 下的文章

DCImanager 5 - Windows 11 英文企业90天试用版 - Unattend.xml

与之前的 Windows 10 做比较，是增加了跳过安装需求硬件检测，和添加网卡驱动inf目录路径。文件内容如下：

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                    <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Order>1</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassTPMCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>2</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassSecureBootCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>3</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassRAMCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>4</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassCPUCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassStorageCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
            <UserData>
                <AcceptEula>true</AcceptEula>
            </UserData>
         <DiskConfiguration>
                <WillShowUI>OnError</WillShowUI>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Order>1</Order>
                            <Size>100</Size>
                            <Type>Primary</Type>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Extend>true</Extend>
                            <Order>2</Order>
                            <Type>Primary</Type>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Active>true</Active>
                            <Format>NTFS</Format>
                            <Label>System</Label>
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                        </ModifyPartition>
                        <ModifyPartition wcm:action="add">
                            <Order>2</Order>
                            <PartitionID>2</PartitionID>
                            <Label>Windows</Label>
                            <Letter>C</Letter>
                            <Format>NTFS</Format>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>0</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
            </DiskConfiguration>
            <ImageInstall>
                <OSImage>
                    <InstallTo>
                        <DiskID>0</DiskID>
                        <PartitionID>2</PartitionID>
                    </InstallTo>
                    <InstallFrom>
                        <MetaData wcm:action="add">
                            <Key>/IMAGE/INDEX</Key>
                            <Value>1</Value>
                        </MetaData>
                    </InstallFrom>
                    <WillShowUI>OnError</WillShowUI>
                    <InstallToAvailablePartition>false</InstallToAvailablePartition>
                </OSImage>
            </ImageInstall>
        </component>
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-US</UILanguage>
            </SetupUILanguage>
            <InputLocale>0409:00000409</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-US</UserLocale>
            </component>
            
               <component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DriverPaths>
                <PathAndCredentials wcm:action="add" wcm:keyValue="1">
                    <Path>c:\windows\ndis68</Path>
                </PathAndCredentials>
                <PathAndCredentials wcm:action="add" wcm:keyValue="2">
                    <Path>d:\windows\ndis68</Path>
                </PathAndCredentials>
                <PathAndCredentials wcm:action="add" wcm:keyValue="3">
                    <Path>x:\windows\ndis68</Path>
                </PathAndCredentials>
                <PathAndCredentials wcm:action="add" wcm:keyValue="4">
                    <Path>k:\windows\ndis68</Path>
                </PathAndCredentials>    
            </DriverPaths>            
            </component>
            
    </settings>


    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserAccounts>
                <AdministratorPassword>
                    <Value>($PASS)</Value>
                </AdministratorPassword>
            </UserAccounts>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
            <SkipMachineOOBE>true</SkipMachineOOBE>
            <SkipUserOOBE>true</SkipUserOOBE>
            <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
            <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
        <ProtectYourPC>3</ProtectYourPC>
            </OOBE>
        </component>
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
        </component>
    </settings>

<settings pass="specialize">
    <component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
        <Interfaces>
            <Interface wcm:action="add">
                <Ipv4Settings>
                    <DhcpEnabled>false</DhcpEnabled>
                    <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
                </Ipv4Settings>
                <Ipv6Settings>
                    <DhcpEnabled>false</DhcpEnabled>
                    <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
                </Ipv6Settings>
                <Identifier>($WIN_MAC)</Identifier>
                <UnicastIpAddresses>
                    <IpAddress wcm:action="add" wcm:keyValue="1">($IP)/($NETMASK_SHORT)</IpAddress>
                    <IpAddress wcm:action="add" wcm:keyValue="2">($IPv6)/($NETMASKv6)</IpAddress>
                </UnicastIpAddresses>
                <Routes>
                    <Route wcm:action="add">
                        <Identifier>1</Identifier>
                        <Metric>10</Metric>
                        <NextHopAddress>($GATEWAYv4)</NextHopAddress>
                        <Prefix>0.0.0.0/0</Prefix>
                    </Route>
                    <Route wcm:action="add">
                        <Identifier>2</Identifier>
                        <Metric>10</Metric>
                        <NextHopAddress>($GATEWAYv6)</NextHopAddress>
                        <Prefix>::/0</Prefix>
                    </Route>
                </Routes>
            </Interface>
            <!--Interface wcm:action="add">
                <Ipv4Settings>
                    <DhcpEnabled>false</DhcpEnabled>
                    <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
                </Ipv4Settings>
                <Ipv6Settings>
                    <DhcpEnabled>false</DhcpEnabled>
                    <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
                </Ipv6Settings>
                <Identifier>Ethernet 2</Identifier>
            </Interface-->
        </Interfaces>
    </component>
    <component name="Microsoft-Windows-DNS-Client" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
        <Interfaces>
            <Interface wcm:action="add">
                <Identifier>($WIN_MAC)</Identifier>
                <DNSDomain>($HOSTNAME)</DNSDomain>
                <DNSServerSearchOrder>
                    <IpAddress wcm:action="add" wcm:keyValue="1">($NAMESERVER)</IpAddress>
                </DNSServerSearchOrder>
                <DisableDynamicUpdate>false</DisableDynamicUpdate>
                <EnableAdapterDomainNameRegistration>false</EnableAdapterDomainNameRegistration>
            </Interface>
        </Interfaces>
    </component>
    <component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
          <fDenyTSConnections>false</fDenyTSConnections>
      </component>
      <component name="Microsoft-Windows-TerminalServices-RDP-WinStationExtensions" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
          <UserAuthentication>0</UserAuthentication>
      </component>
    <component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
        <FirewallGroups>
            <FirewallGroup wcm:action="add" wcm:keyValue="RemoteDesktop">
                <Active>true</Active>
                <Group>@FirewallAPI.dll,-28752</Group>
                <Profile>all</Profile>
            </FirewallGroup>
        </FirewallGroups>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
        <RunSynchronous>
           <RunSynchronousCommand wcm:action="add">
              <Description>Delete route</Description>
              <Order>1</Order>
              <Path>cmd /c echo IF "($IPv4)"=="" (route delete 0.0.0.0/0) ELSE IF "($IPv6)"=="" (route delete ::/0) >> %windir%\setup\scripts\SetupComplete.cmd</Path>
              <WillReboot>OnRequest</WillReboot>
           </RunSynchronousCommand>
           <RunSynchronousCommand wcm:action="add">
                       <Description>Disable Network Discovery</Description>
                       <Order>2</Order>
                       <Path>cmd /c echo cmd /c %windir%\System32\WindowsPowerShell\v1.0\powershell.exe -command "&amp; {&amp;'Disable-NetFirewallRule' –DisplayName '@FirewallAPI.dll,-32752'}" >> %windir%\setup\scripts\SetupComplete.cmd</Path>
                       <WillReboot>OnRequest</WillReboot>
           </RunSynchronousCommand>
                   <RunSynchronousCommand wcm:action="add">
                       <Description>Setting multiple nameservers</Description>
                       <Order>3</Order>
                       <Path>cmd /c echo cmd /c %windir%\setup\scripts\nameservers.cmd ($NAMESERVERS) >> %windir%\setup\scripts\SetupComplete.cmd</Path>
                       <WillReboot>OnRequest</WillReboot>
                   </RunSynchronousCommand>
           <RunSynchronousCommand wcm:action="add">
                       <Description>Enable language</Description>
                       <Order>4</Order>
                       <Path>cmd /c %windir%\System32\WindowsPowerShell\v1.0\powershell.exe %windir%\setup\scripts\lang.ps1 "($LANG)" >>%windir%\setup\scripts\lang.log 2>&amp;1</Path>
                       <WillReboot>Never</WillReboot>
                   </RunSynchronousCommand>
           <RunSynchronousCommand wcm:action="add">
              <Description>finish</Description>
              <Order>5</Order>
                      <Path>cmd /c echo cmd /c %windir%\setup\scripts\wget.exe -O- "($FINISH)" >> %windir%\setup\scripts\SetupComplete.cmd</Path>
              <WillReboot>OnRequest</WillReboot>
           </RunSynchronousCommand>
           <RunSynchronousCommand wcm:action="add">
                      <Description>Postinstall script listener</Description>
                      <Order>6</Order>
                      <Path>cmd /c IF "($HAS_RECIPE)"=="1" (echo cmd /c %windir%\System32\WindowsPowerShell\v1.0\powershell.exe  %windir%\setup\scripts\winrm_listener.ps1 "($HOSTNAME)" "($LOCATIONIP)") >> %windir%\setup\scripts\SetupComplete.cmd</Path>
                      <WillReboot>OnRequest</WillReboot>
                   </RunSynchronousCommand>
                   <RunSynchronousCommand wcm:action="add">
                       <Description>Put key</Description>
                       <Order>7</Order>
                       <Path>cmd /c echo ($PRODUCTKEY) >> %windir%\setup\key</Path>
                       <WillReboot>OnRequest</WillReboot>
                   </RunSynchronousCommand>
                   <RunSynchronousCommand wcm:action="add">
                       <Description>Activating windows</Description>
                       <Order>8</Order>
                       <Path>cmd /c echo cmd /c %windir%\setup\scripts\activate.cmd >> %windir%\setup\scripts\SetupComplete.cmd</Path>
                       <WillReboot>OnRequest</WillReboot>
                   </RunSynchronousCommand>
                   <RunSynchronousCommand wcm:action="add">
                       <Description>TZ setup</Description>
                       <Order>9</Order>
                       <Path>cmd /c IF NOT "($TIMEZONE)" == "()" ( IF NOT "($TIMEZONE)" == "" (tzutil /s "($TIMEZONE)"))</Path>
                       <WillReboot>OnRequest</WillReboot>
                   </RunSynchronousCommand>
           <RunSynchronousCommand wcm:action="add">
                  <Description>Enable administrator</Description>
                  <Order>10</Order>
                  <Path>net user administrator /active:yes</Path>
                  <WillReboot>OnRequest</WillReboot>
               </RunSynchronousCommand>
        </RunSynchronous>
    </component>
</settings>
    <cpi:offlineImage cpi:source="catalog:c:/distr/7601.17514.101119-1850_x64fre_server_eval_en-us-grmsxeval_en_dvd/sources/install_windows server 2008 r2 serverstandard.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

参考：